NM360 and NM400 steel plates belong to the series of wear-resistant steel plates, which are mainly used for occasions or parts that need wear-resistant, to provide protection, to make the equipment life longer, to reduce the maintenance and shutdown caused by maintenance, and to reduce the investment of funds accordingly.

In the name of NM360 steel plate, N is the pinyin letter of nai, M is the pinyin letter of mill (mo), and 360 represents the average Brinell hardness of this steel plate. NM360 steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, etc., and is also commonly used as a high-strength structural steel with yield strength ≥700MPa.

NM45 Wear-resistant plate is a special steel plate material, mainly used for occasions requiring high strength and wear resistance. 450 indicates that the average Brinell hardness of this steel plate has reached 450HB. This steel plate has excellent wear resistance and can be used for a long time in harsh working environments, effectively extending the service life of equipment, reducing the number of maintenance and downtime, thus reducing the operating costs of enterprises.

NM45 Wear-resistant plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery and other fields, such as loaders, bulldozers, excavators, mining crushers and other equipment wear-resistant parts. In addition, it can also be used as a high-strength structural steel with yield strength ≥850MPa, and has a wide range of application prospects.

When manufacturing NM45 Wear-resistant plate, it is necessary to control its chemical composition and heat treatment process to ensure that it has good wear resistance and mechanical properties. Generally, the C content of NM450 wear-resistant medium thick steel plate is 0.21% to 0.27%, the Si content is 0.15% to 0.35%, the Mn content is 1.00% to 1.60%, and the P content and S content are low. At the same time, it is also necessary to carry out heat treatment processes such as high temperature tempering and quenching + tempering (tempering) to obtain the best mechanical properties and wear resistance.

AR400 Wear-resistant plate is an imported wear-resistant steel plate, with high strength, high toughness, fatigue resistance, impact resistance, corrosion resistance, wear resistance, easy processing and other high-quality properties, in the machinery and equipment manufacturing industry, such as mining machinery, coal mining machinery, forklift, construction machinery, mixer, agricultural machinery and so on.

AR400 Wear-resistant plate because it has a variety of high-quality properties, in the process of use, the embodiment of high-quality performance has also been consistently praised and recognized by the manufacturing industry, and later gradually became one of the steel plate brands commonly used in some domestic mining manufacturing industry.

SM45-SM55, SM3Cr2Mo steel plate is a plastic die steel, suitable for the manufacture of various plastic molds. Here are the details of these materials:

SM45-SM55: This series of plastic die steel is a kind of pre-hardened plastic die steel, after electroslag remelting treatment, with high purity, high precision, high uniformity, suitable for manufacturing large, complex, precise plastic die. The steel has good polishing and welding properties, can be polished and etched treatment, suitable for a variety of mirror and high gloss plastic products. At the same time, the wear resistance and corrosion resistance of the steel are also good, which can extend the service life of the mold.
SM3Cr2Mo: This is a pre-hardened plastic die steel, after a special heat treatment process, with excellent machining properties, polishing properties and corrosion resistance. The hardness of the steel is between HRC30-40, can be cut, drilling, milling and other processing operations, and has good polishing properties, can make high gloss plastic products. In addition, the corrosion resistance of the steel is also good, which can extend the service life of the mold.

S45C-S55C steel plate is a kind of medium carbon high-quality steel with high strength, due to poor hardenability, generally used in normalizing state, when the mechanical properties are higher, the tempering treatment is used. The cold deformation plasticity is medium, and the machinability of annealing and normalizing is better than that of conditioning.

It is used to manufacture parts with high strength requirements, such as gears, shafts, piston pins, etc., and mechanical workpieces, forgings, stamping parts, bolts, nuts, and pipe joints with small forces.

P20, 718, P80 steel plates are die steel, the details are as follows:

P20 steel is a commonly used mold steel, with good cutting and heat treatment properties, suitable for manufacturing small and medium-sized molds, such as plastic molds, die casting molds, etc.
718 steel is a kind of high-strength, high-hardness mold steel, with good heat resistance and wear resistance, suitable for manufacturing large molds, such as automobile molds, aviation molds and so on.
P80 steel is a high-grade plastic die steel, with excellent wear resistance, machinability and corrosion resistance, suitable for the manufacture of high-precision molds.

45-55, 50Mn steel plates are high-quality carbon structural steel, commonly used to manufacture the most important mechanical parts, such as gear shafts, gears, bearings and springs.

The grade of high-quality carbon structural steel is represented by two digits, which is the fraction of the average carbon content of the steel, that is, the number obtained by multiplying the average carbon content by ten thousand. For example, 45 indicates a carbon steel with an average carbon content of 0.45%.

These are different types of steel plates, specifically, they belong to a kind of wear-resistant steel. The models and specifications of these steel plates are different, but they all have high wear resistance and are widely used in mining, construction, machinery manufacturing and other fields. The following is a brief introduction of these steel plate models:

WNM320, WNM360, WNM400, WNM450, WNM500, WNM600: These are the brands of wear-resistant steel, the larger the number, the better the wear resistance. These steel plates have high hardness and wear resistance, and are suitable for applications that need to withstand heavy loads and strong friction, such as the manufacture of mining machinery such as excavator buckets and crushers.
WN550: This is a high-strength wear-resistant steel plate with high tensile strength and yield strength, suitable for the manufacture of wear-resistant parts that need to withstand high stress and strong impact, such as crusher plates and hammers.
WRZ400: This is a surface coated wear-resistant steel plate, its surface is coated with a special layer of wear-resistant coating to improve its wear resistance. This steel plate is suitable for applications that need to withstand friction and wear, such as conveyor belts, cement manufacturing machinery, etc.

It should be noted that the specific performance and application range of these steel plates may vary by different manufacturers and standards. In practical applications, appropriate wear-resistant steel plate models should be selected according to specific needs and occasions.