‹
›
A283 Carbon Steel Plate
Type： Thick Steel Plate
Thickness： 4.5mm - 25mm
Length： 6000mm - 12000mm
Breadth： 1500mm - 2000mm
Contact us via the following ways
WhatsApp：+86 156 6651 3621
Email Address：inquiry@hbiswugangsteel.com
Message
Product Introduction
A283 carbon plate is a low carbon steel plate used for general structural purposes.
A283 carbon steel plate has good formability, weldability and mechanical properties, as well as a low carbon content, usually less than 0.25%. This mild steel sheet is easy to process and manufacture and can be safely welded with various welding methods. A283 carbon steel plates are mainly used in the manufacture of storage tanks and cryogenic control vessels, riveted, bolted and welded structures for Bridges and buildings, including prefabricated buildings, warehouses and industrial and commercial structures. In addition, the A283 carbon steel plate also has good corrosion and oxidation resistance, which is able to remain stable in many different environments.
A283 carbon steel plate is divided into four grades according to the structural quality of use: A283GrA, A283GrB, A283GrC, A283GrD. The main difference between these grades is the difference in their mechanical properties and chemical composition to meet different application requirements. For example, A283GrA steel plate has low yield strength and tensile strength, which is suitable for some structures with low strength requirements, while A283GrD steel plate has high yield strength and tensile strength, which is suitable for structures that need to withstand higher stresses.
Overall, the A283 carbon steel plate is an excellent, versatile material suitable for many different structural applications. However, when choosing whether to use A283 carbon steel plates, factors such as strength, toughness, corrosion resistance, processability and cost need to be taken into account.
A283 carbon steel plate has good formability, weldability and mechanical properties, as well as a low carbon content, usually less than 0.25%. This mild steel sheet is easy to process and manufacture and can be safely welded with various welding methods. A283 carbon steel plates are mainly used in the manufacture of storage tanks and cryogenic control vessels, riveted, bolted and welded structures for Bridges and buildings, including prefabricated buildings, warehouses and industrial and commercial structures. In addition, the A283 carbon steel plate also has good corrosion and oxidation resistance, which is able to remain stable in many different environments.
A283 carbon steel plate is divided into four grades according to the structural quality of use: A283GrA, A283GrB, A283GrC, A283GrD. The main difference between these grades is the difference in their mechanical properties and chemical composition to meet different application requirements. For example, A283GrA steel plate has low yield strength and tensile strength, which is suitable for some structures with low strength requirements, while A283GrD steel plate has high yield strength and tensile strength, which is suitable for structures that need to withstand higher stresses.
Overall, the A283 carbon steel plate is an excellent, versatile material suitable for many different structural applications. However, when choosing whether to use A283 carbon steel plates, factors such as strength, toughness, corrosion resistance, processability and cost need to be taken into account.
What is Carbon Steel Plate
Carbon steel plate is a kind of metal material, mainly composed of carbon, silicon, manganese, sulfur, phosphorus and other elements, of which the content of carbon is less than 2.11%, and no other metal elements are deliberately added. This material is also known as plain carbon steel or carbon steel.
Carbon steel plate has good mechanical properties, including high strength, hardness and excellent toughness. At the same time, it also has excellent thermal properties, can maintain high strength and hardness at high temperatures. In addition, the process performance of the carbon steel plate is also better, and it is easy to cut, bend and polish processing operations.
The application field of carbon steel plate is very wide. In the field of construction, carbon steel plates are used for stairs, doors, Windows, drainage systems, roofs and steel structures, which not only ensure the stability and safety of the building, but also improve the beauty and durability of the building. In the manufacturing industry, carbon steel plates are widely used in automobiles, ships, machinery, chemicals, electronics, communications and other aspects, such as the manufacture of car doors, roofs and body frames. In addition, carbon steel plates also have applications in the field of renewable energy, such as for manufacturing components such as wheels and towers for wind and solar power equipment. In terms of transportation manufacturing, carbon steel plates are also used in the manufacturing of vehicles such as cars, trains, and airplanes.
The production process of carbon steel plate includes raw material selection, steelmaking, rolling and trimming. Raw materials mainly include billet, limestone, coke and other alloying elements, among which billet is the basic raw material for the production of carbon steel plate. The steelmaking stage involves collecting, cleaning and heating billets, which are then put into a blast furnace for heating and smelting. The refined molten steel is fed to the mill for rolling, and the final carbon sheet is produced. Finally, the carbon plate also needs to be trimmed to meet the needs of different customers and applications.
Please note that the specific specifications, performance parameters and application recommendations of carbon steel plates should be selected according to the specific application environment and requirements. At the same time, when using carbon steel plates, the relevant safety specifications and instructions should be followed to ensure that it plays a safe and effective role.
Carbon steel plate has good mechanical properties, including high strength, hardness and excellent toughness. At the same time, it also has excellent thermal properties, can maintain high strength and hardness at high temperatures. In addition, the process performance of the carbon steel plate is also better, and it is easy to cut, bend and polish processing operations.
The application field of carbon steel plate is very wide. In the field of construction, carbon steel plates are used for stairs, doors, Windows, drainage systems, roofs and steel structures, which not only ensure the stability and safety of the building, but also improve the beauty and durability of the building. In the manufacturing industry, carbon steel plates are widely used in automobiles, ships, machinery, chemicals, electronics, communications and other aspects, such as the manufacture of car doors, roofs and body frames. In addition, carbon steel plates also have applications in the field of renewable energy, such as for manufacturing components such as wheels and towers for wind and solar power equipment. In terms of transportation manufacturing, carbon steel plates are also used in the manufacturing of vehicles such as cars, trains, and airplanes.
The production process of carbon steel plate includes raw material selection, steelmaking, rolling and trimming. Raw materials mainly include billet, limestone, coke and other alloying elements, among which billet is the basic raw material for the production of carbon steel plate. The steelmaking stage involves collecting, cleaning and heating billets, which are then put into a blast furnace for heating and smelting. The refined molten steel is fed to the mill for rolling, and the final carbon sheet is produced. Finally, the carbon plate also needs to be trimmed to meet the needs of different customers and applications.
Please note that the specific specifications, performance parameters and application recommendations of carbon steel plates should be selected according to the specific application environment and requirements. At the same time, when using carbon steel plates, the relevant safety specifications and instructions should be followed to ensure that it plays a safe and effective role.
Product Application
Building materials
Bridge construction
Bearing parts
Packaging And Warehouse
Customer Visit
Customer's visit is an important part of our long-term cooperative relationship, every customer's visit is our driving force forward, we value every communication with you. We are very welcome and look forward to your frequent visit, with us to explore more cooperation opportunities, we are committed to provide you with one-stop service, whether it is product consultation, technical support or business negotiations, we will go all out, in order to ensure that your visit is smooth, we have prepared all the necessary support and service, ready to meet your arrival.
Wugang Steel Group Co., Ltd.
Wugang Steel Group Co., Ltd. is China's important wide and thick steel plate production and research base, through years of hard work, Wugang Steel Group Co., Ltd. has become China's important wide and thick steel plate localization instead of import base. The existing highly specialized 4100mm, 4200mm two wide and thick steel production lines, the process technology and equipment have reached the international first-class level, steel heat treatment technology, extra thick steel production technology, electroslag steel production technology belong to the leading level of the same industry.
We are not only being able to offer our clients with the best quality products and competitive prices, but also provide the best solution for steel product procurement.
Nowadays, Yieh Corp. has successfully developed into a prestigious vendor globally and attaches great importance to contributions to the environment and society. We are well aware that climate change has caused severe environmental challenges. Therefore, in response to the love of the Earth, how to reduce carbon and slow down the damage to the Earth will become urgent tasks to the employees, customers, and shareholders.
We proactively participate in greenhouse gas inventory and conform to the relevant regulations to ensure that business activities comply with regulatory requirements and are committed to reducing the negative impact on the earth. We are convinced that environmental sustainability is an important step in achieving enterprise sustainability development and is helpful in providing products and services with environmental value to customers and consumers.
Support Customization
All products accept the size, material, specifications of the specified production, we will also give you some suggestions
Accept Third-Party Testing
All products are tested by third party testing institutions, and we value product quality and brand honor
Export Experience
Our customers are in many countries all over the world, and we have very rich experience in export trade
Worry Free After Sale
We provide pre-sale, sale and after-sales service, from order to use, we will always be on the road
Certificate Display
All our products are subject to professional quality inspection by third party testing institutions, and all test results are available for review and can be attached with relevant quality certificates or test results
FAQ
Are you having any problems? You can always ask us about your problems, or you can browse the topics below to find what you are looking for.
Are you trading company or manufacturer ?
We are China's professional Thick steel plate Manufacturers, we can also accept other materials and models of products
How long is your delivery time?
General models take 7-10 working days, and special sizes and processing take 10-30 working days. It is based on order quantity and demand.
Do you provide samples ? Is it free or extra ?
We can provide samples to you for free, but the cost of express delivery will be borne by you.
Do you support customization ?
Yes, we have a full stock of products with a full range of models and a working production line. If you don't have what you want, we can customize it.
Do you accept third party testing ?
Yes, we fully accept the quality inspection of the third party inspection institutions. We attach great importance to the reliability of product quality
What are the advantages of your company?
First of all, we have an absolute advantage in price. Secondly, the quality of products is also strictly controlled.
Contact Us
Get in Touch
We will contact you as soon as possible
Get in Touch
You can also contact us through the following way, all the personal information you fill in will not be leaked, it will only affect the transaction between us.
Telephone
0086 156 6651 3621
0086 156 6651 3621
Email Address
inquiry@hbiswugangsteel.com
Address
West Section of Hubin Avenue, Wugang City, Henan Province
Recommended Product
GS80 steel plateGS80 steel plate is a kind of special steel plate with high strength and toughness, which has excellent mechanical properties, corrosion resistance, wear resistance and welding performance. Its tensile strength, yield strength, elongation are in line with national standards, widely used in military, petroleum, chemical, electric power, ships, Bridges and other fields.
The chemical composition of GS80 steel plate is based on low carbon steel, by adding appropriate alloying elements, such as chromium, nickel, molybdenum, etc., to improve its comprehensive performance. These alloying elements play a role in solid solution strengthening, refining matrix structure, and improving the strength and toughness of steel.
In addition, GS80 steel plate also has good fatigue resistance, corrosion resistance and wear resistance, and can maintain stable performance under complex environmental conditions. At the same time, the GS80 steel plate is also easy to process and weld, and can be cut, bent, formed and welded according to the need for processing operations.- NM360,NM400 steel plateNM360 and NM400 steel plates belong to the series of wear-resistant steel plates, which are mainly used for occasions or parts that need wear-resistant, to provide protection, to make the equipment life longer, to reduce the maintenance and shutdown caused by maintenance, and to reduce the investment of funds accordingly.
In the name of NM360 steel plate, N is the pinyin letter of nai, M is the pinyin letter of mill (mo), and 360 represents the average Brinell hardness of this steel plate. NM360 steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, etc., and is also commonly used as a high-strength structural steel with yield strength ≥700MPa. - D40,E40 steel plateD40 steel is a kind of high-strength and high-toughness Marine structural steel, which is mainly used in large-scale offshore engineering, ship construction and offshore platforms. Its main characteristics are good weldability, low temperature toughness and corrosion resistance, which can meet the requirements of use in extreme Marine environments.
The chemical composition of D40 steel mainly includes carbon (C), silicon (Si), manganese (Mn), sulfur (S), phosphorus (P), chromium (Cr), nickel (Ni), copper (Cu), molybdenum (Mo) and aluminum (Al) and other elements.
E40 steel plate is a kind of high-strength, high-toughness steel, usually used in the manufacture of ships, offshore platforms, petrochemical and other fields of structural parts and welding parts. Its characteristics are as follows:
High strength: E40 steel plate has high tensile strength and yield strength, and can withstand large loads and pressures.
High toughness: the steel plate has good impact toughness and bending properties, and can maintain good toughness and stability in low temperatures or complex environments.
Wear resistance: E40 steel plate after special treatment, high surface hardness, good wear resistance, can extend the service life of the equipment.
Good welding performance: the steel plate has good weldability, and the quality of the welded joint is stable and reliable.
Corrosion resistance: E40 steel plate after special treatment, has good corrosion resistance, can adapt to a variety of complex environments. - AISI 1045 Carbon steel coilAISI 1045 carbon steel coil is a medium carbon steel material, its chemical composition is mainly composed of carbon, manganese, phosphorus, sulfur and other elements, in which the content of carbon is between 0.43% and 0.50%, and the content of manganese is about 0.60% to 0.90%. This steel has good weldability, machinability and high strength and impact properties under normalizing or hot rolling conditions, with tensile strength of 570-700 MPa and Brinell hardness varying between 170 and 210.
AISI 1045 carbon steel coils also feature low full hardening characteristics, with a recommended section size of approximately 60 mm suitable for tempering and full hardening. At the same time, it can be effectively flame or induction quenched in the normalizing or hot rolled state to achieve surface hardness of Rc 54 to Rc 60.
AISI 1045 carbon steel coil is widely used in machinery manufacturing, automobile manufacturing, shipbuilding and other fields. In mechanical manufacturing, it can be used to manufacture machine tool parts, gears, bearings, etc., and its high strength and toughness can ensure the stability and reliability of mechanical equipment. In automotive manufacturing, AISI 1045 carbon steel coils can be used to manufacture automotive crankshafts, drive shafts, transmission gears and other key components to improve the power transmission efficiency and service life of vehicles. In ship manufacturing, it can be used to manufacture ship's propulsion shaft, transmission shaft and connecting parts, etc., to meet the needs of ships in harsh Marine environments. In addition, it can also be used to manufacture agricultural machinery, construction machinery, mining equipment, etc., to meet the requirements of material strength and wear resistance in different fields.
Please note that the specific chemical composition, mechanical properties and application areas may vary depending on the manufacturer and market needs. Therefore, when selecting and using AISI 1045 carbon steel coil, it is necessary to make a reasonable choice according to the specific application environment and requirements. - AISI 1050 Carbon steel coilAISI 1050 Carbon steel coil is a steel coil made from American Iron and Steel Institute (AISI) standard carbon structural steel. The chemical composition of this steel mainly includes carbon (C), manganese (Mn), phosphorus (P), sulfur (S) and other elements, of which the content of carbon is between 0.48% and 0.55%.
AISI 1050 carbon steel coil has high strength and hardness due to its high carbon content, which makes it excellent in applications requiring high strength and wear resistance, such as manufacturing blades, brackets, brake discs, clutches, springs, washers, gears, etc. In addition, AISI 1050 carbon steel coil also has good machinability, high wear resistance and weldability, so it is widely used in many fields, including machine building, automotive manufacturing, oil and gas industry, food industry and so on.
Please note that the specific chemical composition, mechanical properties and application areas may vary depending on the manufacturer and market needs. Therefore, when selecting and using AISI 1050 carbon steel coil, it is necessary to make a reasonable choice according to the specific application environment and requirements. In addition, regarding the specific specifications, performance parameters and application recommendations of AISI 1050 carbon steel coils, it is recommended to consult professionals in the field of metal materials or consult relevant industry standards and technical documents. - Q195 Carbon steel coilQ195 carbon steel coil is a low-carbon structural steel with a yield strength of 195 MPa. The main component of this steel is carbon, but it also contains small amounts of other elements, such as silicon, manganese, sulfur, phosphorus, and so on. Due to the low carbon content (usually no more than 0.25%), Q195 carbon steel rolls have low hardness and strength, but relatively good toughness and ductility. This makes it easy to process and make into various shapes, so it has a wide range of applications in industry and construction.
Specific uses of Q195 carbon steel coils include:
Construction field: Because of its good plasticity and toughness, Q195 carbon steel coil is widely used in the load-bearing parts of building structures, such as beams, columns, plates, etc., to meet the safety and durability requirements of buildings.
Mechanical field: Q195 carbon steel coil is also used in the manufacture of various pressure vessels, reactors, heat exchangers and other equipment, but also used in the manufacture of some precision mechanical parts and wear parts.
Automotive field: In automotive manufacturing, Q195 carbon steel rolls are used to make automotive body panels, frames, bumpers and other components, as well as engine parts and chassis parts.
Marine field: Due to its high strength and good corrosion resistance, Q195 carbon steel coil is also widely used in shipbuilding, such as hull structure, deck, cabin and other parts.
In addition, Q195 carbon steel coil also has good weldability and plasticity, can be processed into a variety of shapes and sizes, so it is also widely used in bridge construction and other engineering fields.
It is important to note that the specific chemical composition, mechanical properties and application areas of Q195 carbon steel rolls may vary depending on the manufacturer and market needs. Therefore, when selecting and using Q195 carbon steel coil, it is necessary to make a reasonable choice according to the specific application environment and requirements. At the same time, due to the relatively low strength of the Q195 carbon steel roll, it may not be suitable for occasions where high-strength materials are required. In this case, you need to consider the use of higher strength steel, such as Q235 or Q345. - Seamless Steel PipeSeamless pipes are derived from solid steel that is in sheet or bar form and is formed into a solid round shape known as “billets” which are then heated and cast over a form such as a piercing rod to create a hollow tube or shell. From: Reliability and Maintainability of In-Service Pipelines.
Carbon steel, also known as carbon steel, is an iron carbon alloy with an internal carbon content of nearly 2%. In addition to carbon, carbon steel contains many other elements, such as manganese, sulfur, or silicon. Generally speaking, the higher the amount of carbon contained in carbon steel, the greater its hardness, the higher the strength will be produced. Just note that the higher the carbon content, the lower the plasticity. - API 5L Seamless Line pipeAPI 5L Seamless Line pipe is a seamless steel pipe that is manufactured without welded joints and therefore has higher strength and corrosion resistance. This steel pipe is made of high carbon steel or alloy steel, after heat treatment and processing, has excellent mechanical properties and high temperature, high pressure, corrosion resistance. API 5L Seamless Line pipe is mainly used for long-distance transmission of oil and gas, such as oil and gas, and can also be used in the manufacture of high pressure equipment and pipelines.
- SSAW Steel PipeSSAW Steel Pipe, full name Spiral Submerged Arc Welded Steel Pipe, Chinese name spiral submerged arc welded steel pipe. This is a spiral seam steel pipe produced by double-sided submerged arc welding process. In the welding process, the welding current passes through the welding pool, reacts with the metal in the welding pool, forms the slag and fills the weld, thus completing the welding of the steel pipe. Due to the submerged arc welding process, SSAW Steel Pipe has high welding quality and stability, and is widely used in the oil, natural gas, chemical industry, electric power and other fields of pipeline and pressure vessel manufacturing.
- ASTM A573 Carbon steel barASTM A573 Carbon Steel bar is a standard specification for high-strength, low-alloy steel used in the manufacture of structural elements. The standard specifies a variety of different grades and thickness ranges of A573 steel, including carbon content, silicon content, phosphorus content, sulfur content, manganese content, niobium content, vanadium content and other chemical composition and mechanical properties.
ASTM A573 carbon steel rods are low in carbon and silicon and can meet the requirements of different application scenarios. It has high strength and good welding performance, and can be used in the manufacture of various mechanical parts and structural parts, such as Bridges, building structures, ships, aerospace and other fields. In addition, ASTM A573 carbon steel rods also have good laminar tear resistance, which can meet the needs of some special applications.
The ASTM A573 carbon steel rod grade is denoted as "A573Gr", where the "G" indicates that it is a high-strength low-alloy steel and the "r" indicates that it is a steel with good weldability. For example, A573Gr60 indicates that the steel has a yield strength of 600 MPa.
In short, ASTM A573 carbon steel bar is a high-strength, low-alloy steel with good weldability and lamellar tear resistance, which is widely used in the manufacture of various mechanical parts and structural parts. - ASTM A283 Carbon steel barASTM A283 Carbon steel bar is a carbon steel bar for general structural use with low to moderate tensile strength. It is a kind of steel after heat treatment process, with excellent mechanical properties and processing properties. It has a wide range of applications and can be used in the manufacture of various mechanical parts, such as automobiles, ships, aerospace and other fields. In addition, it can also be used in the construction of building structures and Bridges and other infrastructure. The material standard of ASTM A283 carbon steel bar is ASTM A283/A283M-18, which is an international standard. ASTM A283 carbon steel bars in different countries and regions may have some minor differences, but overall, their performance and application range are similar.
- Rebar rodsA steel bar is a strip of steel, a type of building material. For example, in reinforced concrete, the skeleton used to support the structure. Steel bars are tensile but not compressive, concrete is compressive but not tensile, the combination of the two has good mechanical strength, the steel is protected by the concrete and will not rust, and the thermal expansion coefficient of the steel and concrete is approximately the same, and it will not produce rust. Corrosion due to cracks, so it has become an ideal material for modern buildings, and has become a widely used reinforced concrete building.
Carbon steel, also known as carbon steel, is an iron carbon alloy with an internal carbon content of nearly 2%. In addition to carbon, carbon steel contains many other elements, such as manganese, sulfur, or silicon. Generally speaking, the higher the amount of carbon contained in carbon steel, the greater its hardness, the higher the strength will be produced. Just note that the higher the carbon content, the lower the plasticity. - A283 Carbon Steel PlateA283 carbon plate is a low carbon steel plate used for general structural purposes.
A283 carbon steel plate has good formability, weldability and mechanical properties, as well as a low carbon content, usually less than 0.25%. This mild steel sheet is easy to process and manufacture and can be safely welded with various welding methods. A283 carbon steel plates are mainly used in the manufacture of storage tanks and cryogenic control vessels, riveted, bolted and welded structures for Bridges and buildings, including prefabricated buildings, warehouses and industrial and commercial structures. In addition, the A283 carbon steel plate also has good corrosion and oxidation resistance, which is able to remain stable in many different environments.
A283 carbon steel plate is divided into four grades according to the structural quality of use: A283GrA, A283GrB, A283GrC, A283GrD. The main difference between these grades is the difference in their mechanical properties and chemical composition to meet different application requirements. For example, A283GrA steel plate has low yield strength and tensile strength, which is suitable for some structures with low strength requirements, while A283GrD steel plate has high yield strength and tensile strength, which is suitable for structures that need to withstand higher stresses.
Overall, the A283 carbon steel plate is an excellent, versatile material suitable for many different structural applications. However, when choosing whether to use A283 carbon steel plates, factors such as strength, toughness, corrosion resistance, processability and cost need to be taken into account. - Ar400 Wearing PlateAr400 Wearing Plate is a kind of wear-resistant steel plate, mainly used to resist wear and impact occasions. This steel plate has high hardness and strength and is able to maintain its properties and shape under high load and friction.
Ar400 wear-resistant steel plate has excellent wear resistance and can resist wear, scratching and impact. Its high surface hardness can effectively reduce wear and extend the service life of the equipment. In addition, the Ar400 wear-resistant steel plate also has good impact resistance, can withstand strong impact forces and protect equipment from damage.
Ar400 wear-resistant steel plates are widely used in a variety of equipment and machinery that need to withstand wear and impact, such as excavators, loaders, crushers, coal mills, conveyor belts, etc. In these equipment, Ar400 wear-resistant steel can effectively improve the work efficiency and life of the equipment, reduce maintenance costs, and create greater economic benefits for enterprises.
It should be noted that the Ar400 wear-resistant steel plate needs to be selected and configured according to the specific working environment and requirements to ensure its best wear resistance and impact performance. At the same time, during the installation and use, you must comply with the relevant specifications and safety requirements to ensure the safe and stable operation of the device. - 15CrMo,20CrMo,30CrMo steel plate15CrMo, 20CrMo and 30CrMo steel plates are alloy steel plates, which contain 1.25%, 2% and 3% chromium and molybdenum, respectively, to improve the corrosion resistance and high temperature strength of the steel. These steel plates have good hardenability, tempering stability and corrosion resistance, and are suitable for the manufacture of mechanical parts that withstand high loads, high wear and corrosion resistance, such as crankshafts, gears, gas cylinders and pressure vessels.
15CrMo steel plate has good creep resistance and is suitable for working for a long time at high temperature, such as engine piston rings, gas cylinder pressure vessels, etc. 20CrMo steel plate has high hardness and strength after quenching and tempering, which is suitable for manufacturing high-strength and high-wear-resistant mechanical parts, such as crankshaft and connecting rod. 30CrMo steel plate has higher strength and toughness, suitable for the manufacture of high load, high wear resistance and impact of mechanical parts, such as large shafts, high-pressure vessels and so on.
In general, these steel plates are high-quality alloy steel plates suitable for a variety of mechanical parts manufacturing fields requiring high strength, high wear and corrosion resistance.
Inglés
chino